STUCCO K2 PASTE FOR INTERIOR WALL WOOD GR. 250

STUCCO K2 PASTE FOR INTERIOR WALL WOOD GR. 250

TECHNICAL FEATURES

• K2 PASTA

• Paste filler specific for wood and walls
• For inside

FEATURES:

• Excellent ready-to-use putty paste. Specific for indoors. Excellent filling power and excellent yield. Delicately scented, it does not yellow and rots. Free of solvent-based substances. Excellent adhesion on any type of substrate, whether it is wall or wood. Simple to apply. Easy to sand. Excellent anchor for any type of paint and / or wallpaper. Paintable with any type of paint.

HOW TO USE:

• Thoroughly clean the surface to be treated. Completely remove any residues of old paint, plaster, not sufficiently anchored. It is applied with a spatula and, if diluted with water, by brush and spray. In case of high thicknesses (over 2 mm) it is recommended to fill the surface with several successive applications. On porous substrates, based on lime and / or cement, it is advisable to pre-brush our. K2 ACRIL FIX primer.

WHERE IT IS USED:

• Excellent for a quick and clean smoothing of new wall surfaces before painting and / or applying wallpaper. Great for smoothing old walls, after removing paint and wallpaper. Extremely fine below 50 microns. Ideal for a highly qualitative finish. Ideal for filling cracks, crevices, holes and cracks on internal wall surfaces. Great for repairing imperfections and holes on wooden supports. Ideal for grouting furniture, wooden frames, doors and windows.

PRACTICAL ADVICE:

• Store the packages in dry places and away from heat sources. It is recommended to close the package carefully after partial use. Do not return dry and dirty residues to the container. Do not use at too low temperatures. Protect from frost.

WARNINGS FOR USE:

• Paints, coatings, upholstery, etc., must be applied only after the product has completely dried and cured.

• - Ready to use.
• - Excellent filling power.
• - Ideal for highly qualitative finishes.
• - Ideal for furniture, wooden window frames.

PROCESSING TIME:

• always ready.

DRYING AT 20 ° C:

• 2 to 6 hours.

SURRENDER:

• 1 m² / kg (thicknesses of about 1 mm).

FOR INTERNAL.

APPLICATION TEMPERATURE:

• from 5 ° C to 40 ° C

MAXIMUM HAND THICKNESS:

• 1 mm each layer.

PAINTABLE:

• after drying.

RECOMMENDED TOOLS:

• trowel and trowel.