PH- CORRECTOR FOR SWIMMING POOLS MOD.AS/60 LT.1

CORRECTOR OF PH- AS / 60 LT. 1

When to use: when due to severe thunderstorms or a massive influx
of bathers the percentage of active chlorine in the water decreases, there is a danger
rapid formation of algae resulting in numbness of the water
and an increase in the development of bacteria.
Features:
is a mixture of gaseous amines and
quaternary ammonium.
1-to obtain the clarity of the
pool: wash the walls of the pool with
a 5% aqueous solution of
Tensioquat TA 10 (5 parts of tensioquat
TA 10 in 95 parts of water)
Property:
The TA10 tensioquat given, its great power
algaecide (due to the action of the amine
particularly present), bactericidal and
ungicide (given by the particular type of ammonium
quaternary), has the property of preventing
the reproduction of algae and gods
bacteria; therefore it has an energetic sanitizing action
preventing with temporarily
the numbness of the waters and contamination
of the same.
TECHNOLOGY:
the percentage of use of Tensioquat
TA10 in order to obtain the desired results
varies according to the following
uses:
1-to obtain the clarity of the
pool: wash the walls of the pool with
a 5% aqueous solution of
Tensioquat TA 10 (5 parts of tensioquat
TA 10 in 95 parts of water)
2-water protection: mix
to the pool water 2-5 liters of tensioquat
TA 10 for every 100m3 of water.
3-water conservation: for the
maintaining the purity of the water
use from ml. 750 to 2 liters of Tensioquat
TA 10 for each week and per base unit
referred to 100 m³ of water according to
need.
4-after weather conditions
unforeseen events: for example thunderstorms, snow,
dust, etc .., add
ml. 500/1000 of T ensioquat TA 10 for
every m³ of water as needed.
How to use: pour the dose
uniformly prescribed in the water of the
swimming pool in the absence of swimmers, not simultaneously
to shock-based treatments
of chlorine and with filtration in operation.
(the dosages are indicative and may undergo variations
in relation to its own characteristics
water, swimming pool, weather conditions,
the number of bathers etc ..)
PH + correction
It is a product that is used to raise the
ph in doses of 400 / 500gr. For 100 meters
cubes for 0.1 units. (the cubic meters of the
pool are calculated as follows: Width x
Length x pool depth)
PH CORRECTION -
It is a product that is used to lower
the ph in the doses of 400 / 500gr. For
100 cubic meters for 0.1 units.