BOSTIK POLIMAX UNIVERSAL ASSEMBLY GLUE AND SEALANT HIGH TACK CRIS GR. 300

BOSTIK POLIMAX HIGH TACK CRIS GR. 300

• Polimax High Tack Cris
• From 300 g
• Universal mounting glue and sealant with extraordinary initial tack and great final hold
• First quality mounting adhesive and universal sealant based on a unique SMP technology, with very high initial setting and high speed of reaching the final bond strength. For bonding, mounting and sealing almost all (building) materials on virtually all surfaces (both smooth and porous and non-porous). Very high initial grip. Super fast. Permanent elasticity.
• Fields of application
• Gluing: eg. glass, stone, natural stone, concrete, stucco, numerous plastics, wood, plywood, trespa, iron, aluminum, zinc, steel, stainless steel and other metals, ceramic tiles, cork and mirrors. Assembly: eg. plinths, wooden slats, backs, window sills, thresholds, strips, plates, insulating material, gypsum panels, polystyrene ornaments and borders. Sealing: inter alia internal applications for (plastic) window frames, steps, skirting boards, window sills, thresholds, gypsum panels. Also suitable for sealing cracks in walls and ceilings. Not suitable for polyethylene (PE), polypropylene (PP), PTFE and bitumen.
• Property
• High speed of reaching the final bonding strength Very high final bonding strength Permanent elasticity Suitable for interiors and exteriors Overpaintable (test in advance) Good filling properties Resistant to temperatures between -40 ° C and + 100 ° C Resistant to water, rays UV and atmospheric agents 100% glue (non-shrink) Adheres to slightly damp surfaces Solvent-free Insensitive to mold Excellent adhesion without primer Acid-free, odorless With resealable spout.
• How to use
• Gluing and assembly: cut the nozzle to a diameter of at least 0.5 cm. Sealing: cut the nozzle crosswise according to the width of the joint. Gluing and assembly: apply the glue in strips or in dots (on 10-40 cm) and always at the corners and along the edges of the sheets. Apply the material within 10 minutes in the desired position and press firmly or fix gently with a rubber mallet. Tighten or secure heavy materials for 4 hours, as needed. Hand fixing completed after 30 minutes (the structure is now strong enough to be transported or subjected to a light load); maximum final bond strength after approximately 4 hours, depending on the bonding surface and environmental conditions. Sealing: apply the glue evenly up to the base of the joint and smooth within 10 minutes with the help of a damp spatula (lemon-free soapy water) or a finger. Smooth the vertical joints from bottom to top. Complete hardening after a few days (depending on the thickness of the layer). In case of overcoating with alkyd paint, the paint may dry more slowly. Stains / Residues: Use white spirit to clean tools and remove wet glue residues. Dry glue residues can only be removed mechanically.
• TÜV approved on:
• Shear resistance
• Tensile strength
• Elasticity
• Adhesion to different materials