PATTEX LIQUID STEEL GR. 30
Advertising [ProductAdditionalInfo]
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
PATTEX LIQUID STEEL GR. 30
Product type:
Pattex Liquid Steel is an epoxy / metallic two-component metallic adhesive paste.
It has high mechanical and chemical resistance (it is therefore insoluble in water, oil, alcohol, acids and in most solvents) and at temperatures (up to 100 ° C).
The setting time is about 5 min. (it is therefore quick, but allows you to reposition the parts in case of error) and the welded piece can already be handled after 10-15 min.
It does not contain solvents and hardening does not shrink.
Once hardened it can be worked with tools, sandable, paintable.
Field of use:
Welding of metal parts to each other and to glass, ceramic, masonry, wood and most plastics (excluding polyethylene, polypropylene and PTFE).
Grouting holes and cracks on metal surfaces (eg rust holes) and reconstruction of small details.
How to use:
Remove all traces of dirt and grease from the object to be repaired.
Mix part A and part B in equal quantities with extreme care.
Spread the mixture on the part to be glued and join within 5 min.
Keep the parts in contact for at least 5-10 min.
Sand or work with tools 24 hours after application.
Technical data:
Raw material:
Component A: epoxy resin, fillers, pigments.
Component B: polymercaptan, fillers.
Specific weight:
Component A: 1.30 g / cm3
Component B: 1.60 g / cm3
Mixing ratio: 1: 1 A + B by weight.
Setting time: 4-6 min.
Coverage: about 150-200 g / m2 to be applied on each surface.
How to store: keep in a cool place away from children.
Storage time: stable for one year (if well stored).
Hazard notes: component A irritating to skin and eyes.
feedback Report comment